Getting Started; Powering The Charger On/Off; Led Status Indicators; Charging Nimh/Nicd Batteries - Tronic TLGL 1000 A1 User Manual And Service Instructions

Universal charger
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Getting started

Powering the charger on/off

Position the charger on a stable, flat surface and do not place any objects on the charger. Plug the
mains plug into an easily accessible mains socket.
Each of the LED status indicators (6) flashes red/green once and the display (1) flashes once. After
this, the charger is ready for use. You can charge NiMH, NiCd, Li-Ion batteries and one device
connected to the USB port (3) at the same time.
To switch the charger off, unplug the mains plug from the wall socket.

LED status indicators

The charger has LED status indicators (6) for each battery. The LED status indicators (6) have the
following meanings:
Status
flashes, alternating red/green
flashes, green
on, red
on, green
flashes, red

Charging NiMH/NiCd batteries

After you have connected the charger to the mains, you can insert NiMH/NiCd batteries into the
charging slots (5) to charge them.
You can charge 1 to 6 NiMH/NiCd batteries as follows:
6x AA- or AAA-sized / two NiMH/NiCd batteries each in the charging slots (5) A and D plus
one NiMH/NiCd battery each in the charging slots (5) B and C.
4x C- or D-type / one NiMH/NiCd battery each in the charging slots (5) A, B, C and D
The charging process starts immediately after inserting the NiMH/NiCd batteries. The LED status
indicators (6) show the current status and the display (1) the current charging status.

Charging Li-Ion batteries

After you have connected the charger to the mains, you can charge a Li-Ion battery. Proceed as
follows:
First align the charging contacts for Li-Ion batteries (2) to the position of the positive (+) and
negative (-) Li-Ion battery poles by moving the charging contacts for Li-Ion batteries (2). The
polarity and voltage of Li-Ion batteries are detected automatically.
Description
Battery is being refreshed (Refresh function)
A deeply discharged battery is being precharged
Charging battery
Battery is fully charged
Battery is defective
TRONIC TLGL 1000 A1
English - 7

Advertisement

Table of Contents
loading

Table of Contents