Table of Contents
Advertisement
Symbol
6.4 Setting the oven function
Press
The display shows the recommended
temperature.
If you do not change the this
temperature in less than approximately 5
seconds, the appliance starts to heat.
6.5 Changing the oven
temperature
Press
temperature.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
Oven function
Bottom Heat
You can change the oven
function while the oven
operates.
to set an oven function.
or
to change the
Application
Time of day
To set, change or check the time of day.
Minute Minder
To set countdown time. This function has no effect on the op-
eration of the appliance.
Duration
To set the cooking time of the oven.
End
To set the time of day when the oven should deactivate.
You can use the functions
Duration
and End
the same time to set the
time for how long the
appliance should operate
and when the appliance
should deactivate. This lets
you activate the appliance
with a delay in time. First set
the Duration
and then
the End
.
Application
To bake cakes with crispy bottom and to preserve
food.
When the appliance is at the set
temperature, an acoustic signal sounds.
6.6 Deactivating the oven
function
Press
the display.
6.7 Residual heat indicator
When you deactivate the oven, the
display shows the residual heat.
7.2 Setting the clock functions
at
For Duration
function and temperature. This is not
necessary for the Minute Minder
Refer to "Setting an oven function".
1. Use
display shows the necessary clock
function.
2. Use
time.
ENGLISH
until no oven function shows in
and End
set the oven
again and again until the
or
to set the necessary
11
.
Advertisement
Table of Contents
