JVC GR-SXM26 Instructions Manual page 41

USING THE REMOTE CONTROL UNIT (optional)
M Ð 0 : 0 5 :
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic
Original tape (camcorder)
Display
1 1 M / I 2 N S
operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR.
1
IN OUT
Edited tape (VCR)
Open the cover.
Remote sensor
Remote sensor
To J To Video
terminal output and
(JLIP) Audio
output
connectors
Audio/Video
(A/V) cable
(provided)
INT. TIME
Editing cable
REC. TIME
(optional, ø3.5
Buttons
mini-plug cable)
REW
MENU Button
1
PAUSE IN Connector PLAY
If your VCR has
the SCART PAUSE
2
MBR SET Button
connector, use the
PAUSE (6 ) Button
cable adapter.
3
INT. TIME Button
SELF TIMER Button*
STOP (5 ) Button
4
REC TIME Button
To Remote
ANIM. Button
REW (2 ) Button
RM-V700U
PAUSE
5
FF Button
(optional)
RM-V700U
(optional)
Remote Sensor
6
REW Button
To PAUSE-IN
7
PAUSE Button
8
PLAY Button
9
Infrared beam
transmitting window
0
START/STOP Button
!
VISS Button*
RM-V700U
@
ZOOM (T/W) Buttons
(optional)
#
VCR CTL Button
$
A.DUB Button
%
STOP Button
^
INSERT Button
&
R.A.EDIT Buttons
* This function is unavailable with this camcorder.
Downloaded From VideoCamera-Manual.com Manuals Downloaded From VideoCamera-Manual.com Manuals Downloaded From VideoCamera-Manual.com Manuals Downloaded From VideoCamera-Manual.com Manuals Downloaded From VideoCamera-Manual.com Manuals
4
e
2 0
3 2
Audio dubbing
Interval time indicator
IN OUT IN OUT
indicator
1
Recording time
indicator
During Audio
2
Dubbing
3
Open the
cover.
4
5
6
To S-Video
7
output
8
connector
S-Video cable
(provided)
START/ST
Microphone
Power Switch
START/ST
Recording Start/Stop Button
To AUDIO (L/
With the camcorder's Power Switch set
MONO), VIDEO
to "CAMERA" ("AUTO" or "PRO.").
A.DUB
and -IN
connectors
STOP
Time-Lapse (
"Y/C"/"CVBS"
video out select
switch
Animation, Time-Lapse (
VCR
Retake (forward) (
Retake (rewind), Quick Review
( pg. 17)
TV
Transmits the beam signal.
Functions the same as the Recording Start/Stop Button on the camcorder.
Zoom in/out (
RM-V700U
(optional)
VCR REC STBY
ON/OFF
Aud
MAKE CONNECTIONS AUTOMATIC EDITING TO VCR
Animation and Time-Lapse
FEATURE:
NOTE:
You can record a new soundtrack on a prerecorded tape.
9
Rewind the tape in the camcorder to the beginning of
PURPOSE:
Set "VIDEO OUT" of the camcorder according to the
The existing original sound is erased and replaced by the
the scene you want to edit and press PAUSE.
system of the VCR you will be using. ( sound from the built-in microphone.
The remote control lets you set/release Interval Time
10 Perform steps 1, 2 and 3 of the Insert Editing procedure and Recording Time without using the Menu Screen.
Point the remote control towards the VCR's infrared
1
JVC VCR EQUIPPED WITH REMOTE
( pg. 40) before continuing.
sensor and press VCR REC STBY, or manually engage
OPERATION:
PAUSE TERMINAL
the VCR's Record-Pause mode.
Animation
NOTE:
Connect the editing cable to the Remote PAUSE
1) Set
Use the remote control unit to perform the following
11
terminal.
Press MENU on the camcorder to begin Automatic
Instead of performing steps 1 through 3 on pg. 29
procedures.
Editing, and the previously selected scenes are copied
JVC VCR NOT EQUIPPED WITH REMOTE
("Animation"), press REC TIME on the remote
to the VCR in the specified order.
PAUSE TERMINAL BUT EQUIPPED WITH
1
control. Each time REC TIME is pressed, the
Press REW to go a little beyond the beginning of the
While editing, the R.A. Edit counter of the scene
R.A. EDIT CONNECTOR
Recording Time indicator appears, changing in the
scene onto which you want to dub the new audio,
which is being copied is shown with a blinking
following order: 1/4S, 1/2S, 1S, 5S and no indication
press PLAY to view the recorded tape, then press Connect the editing cable to the R.A.EDIT
highlight.
(off).
PAUSE at exactly the point where dubbing should connector.
•Pressing START/STOP on the remote control does
2) Release
start.
VCR OTHER THAN TYPE
not start editing.
Instead of using the Menu in step 5 on pg. 29, press
Connect the editing cable to the RM-V700U's
2
REC TIME on the remote control until the Recording Press and hold A. DUB, and without releasing
PAUSE-IN connector.
12
When all selected scenes have been copied, the
Time indicator disappears. A. DUB, press and release PAUSE. The Audio Dub-
camcorder and VCR enter the Still or Pause mode.
Time-Lapse Standby mode is engaged.
2
RM-V700U (optional)
Insert a recorded tape into the camcorder and set the
Press STOP on both units. To make the R.A. Edit
1) Set
Power Switch to "PLAY".
counter display disappear, press ON/OFF.
3
To begin Audio Dubbing, press PLAY. When the
Instead of performing steps 1 and 2 on pg. 29
•When finished editing, be sure to disconnect the
counter reaches "0:00:00", Audio Dubbing stops
3
("Time-Lapse"), press REC TIME and INT. TIME on
Turn the VCR power on, insert a recordable tape and
editing cable and the audio/video cable.
Functions
automatically and the camcorder enters the Audio
the remote control. Each time REC TIME is pressed,
engage the AUX mode (refer to the VCR's
Dub-Standby mode.
the Recording Time indicator appears, changing in
NOTES:
instructions).
● If you performed step 1 the following order: 1/4S, 1/2S, 1S, 5S and no
4
NOTES:
To end Audio Dubbing, press STOP.
indication (off). Each time INT. TIME is pressed, the
NECTIONS"), keep the remote control pointed at the
—
● If your VCR has an S-Video input connector or a SCART
Interval Time indicator appears, changing in the
VCR during editing.
connector compatible with Y/C signals, connect the
● The on-screen display only appears while the camcorder following order: 15S, 30S, 1MIN, 5MIN and no
—
camcorder and the VCR using the provided
indication (off).
NOTES: searches for each scene.
pg. 37)
S-Video cable. This can improve the dubbed picture
● There may be noise at in- or out-points on the edited 2) Release
● Do not press FF or REW during Audio Dub-Standby, or
quality.
Instead of using the Menu in step 5 on pg. 29, press
tape with certain VCRs.
the edit points will not be accurate.
● If you use the cable adapter, set the "Y/C"/"CVBS" video
pg. 37)
REC TIME and INT. TIME on the remote control until
● If the microphone is too close to the TV, or if the TV's
out select switch as required.
the indicators disappear.
volume is too high, whistling or howling may occur.
Y/C : When connecting to a VCR which accepts Y/C
pg. 17)
NOTE:
signals and uses an S-Video cable.
NOTES
Also refer to pg. 29.
(for Insert Editing and Audio Dubbing): CVBS : When connecting to a VCR which does not
● Insert Editing and Audio Dubbing may not work
accept Y/C signals and uses an audio/video
cable.
correctly if the tape contains blank segments.
● To edit/dub onto a tape, make sure the Erase Protection
● If you are using a SECAM VCR, set "VIDEO OUT" to
—
tab is in the position that allows recording. If not, slide
"SECAM" (
—
the tab. Some cassettes have removable tabs. If the tab
has been removed, cover the hole with adhesive tape.
● Do not press STOP during Insert Editing or Audio
Dubbing, or the edit points will not be accurate.
● During Insert Editing and Audio Dubbing, when Insert-
—
Pause or Audio Dub-Standby is engaged, the counter
may go slightly past "0:00:00". Recording, however,
pg. 16)
stops at exactly 0:00:00.
—
—
—
—
—
9
0
!
@
#
$
%
^
&
With the camcorder's Power Switch
set to "PLAY". on page 41 ("MAKE CON-
pg. 41
pg. 40
—
—
Fast-Forward, Forward Shuttle Search
( pg. 30)
Rewind, Reverse Shuttle Search
( pg. 30)
Pause ( pg. 30)
pg. 24).
Playback start ( pg. 30)
—
pg. 42
Audio dubbing ( pg. 39)
Stop ( pg. 30)
Insert Editing ( pg. 38)
pg. 42, 43
CONTINUED ON NEXT PAGE.
35
EN
pg. 24)
OR