Installation Requirements; Location Requirements - Haier HFU0100ACW Installation And User Manual

INSTALLATION REQUIREMENTS

LOCATION REQUIREMENTS

Keep ammable materials and vapors, such as gasoline, away from
appliance.
Failure to do so can result in death, explosion or re.
IMPORTANT: This freezer is designed for freestanding installation only. It should
not be recessed or built-in an enclosed cabinet. To ensure your freezer works
at optimum efficiency, you should install it in a location where there is proper air
circulation, and electrical connections.
Recommended Clearances:
•
Do not install your freezer in any location not properly insulated or heated e.g.
garage etc. Your freezer was not designed to operate in temperature settings
below 55˚F (13°C).
•
Select a suitable location for the freezer on a hard even surface away from direct
sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances
etc. Any floor unevenness should be corrected.
•
Place the freezer on a floor strong enough to support it fully loaded.
6
WARNING
Explosion and Fire Hazard
4"
(10.2 cm)
4"
(10.2 cm)
4"
(10.2 cm)