Table of Contents
Advertisement
instructions and warnings to avoid personal injury or product damage.
3. Wash interior surfaces, accessories, and outer frame with cold water and a little
baking soda.
4. Dry thoroughly with a soft cloth.
5. Plug in or reconnect power.
DOOR GASKETS
Gaskets must be kept clean and pliable to assure a proper seal.
•
Clean door gaskets every three months with solution of baking soda and warm
water.
•
Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket
pliable and assure a good seal.
DEFROSTING AND DRAINING
Flammable refrigerant used.
Do not use metal instruments to defrost freezer.
Do not puncture refrigerant tubing.
Failure to do so can result in death, explosion or re.
For most efficient operation and minimum energy consumption, defrost whenever
the frost becomes 1/4" (6 mm) thick.
IMPORTANT:
•
Do not use metal instruments to defrost freezer.
•
Do not use boiling water as it may damage the freezer.
1. Turn the temperature control to the "0" position and unplug the unit. Defrosting
usually takes a few hours. To defrost faster keep the freezer door open.
2. Place a container or tray (not included) in front of the freezer for draining.
NOTE: Water that has accumulated at the bottom of the freezer during
defrosting will drain into the pan. Monitor the container under the drain to avoid
overflow.
3. When defrosting is complete, wipe the interior of the freezer with a soft cloth.
12
DANGER
Fire or Explosion Hazard
Advertisement
Table of Contents
