Replacing The Tail/Brake Light Bulb - Yamaha xvs9500aa Owner's Manual

2
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
PERIODIC MAINTENANCE AND ADJUSTMENT
5. Install the headlight bulb cover,
and then connect the coupler.
1
TIP
When installing the headlight bulb cov-
er, make sure the "TOP" mark faces up-
wards.
1. "TOP" mark
1
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
1
TOP
1. Screw
2. Remove the burnt-out bulb by
7-28
removing the screws.
pushing it in and turning it counter-
clockwise.
EAU24133
1
7