Sony RMT-144A Servise Manual page 13

QQ
3 7 63 1515 0
Guide to On-Screen
Displays
(Control Bar)
The following explains the Control Bar. The
Control Bar is used for making adjustments to
the settings or displaying information during
playback.
The displayed contents differ according to the
type of disc being played. The numbers in
parentheses indicate reference pages.
Displaying the Control Bar during
playback
The following displays appear when the
DISPLAY button is pressed repeatedly
during playback. You can select the setting
that suits the current playback item and view
the related information.
NDisplay 1
The following play modes 1~5 can be set.
The indicator lights up in blue when activated.
Example: When Repeat Play is selected. (The
display will differ when A-B Repeat Play is
set.)
1 2 3 4 5
A Disc mode (37)
B Repeat Play (40)
C Shuffle Play (39)
D Program Play (37)
E A-B Repeat Play (41)
F Unit being repeated in this example.
m
NDisplay 2
The following play modes 7~0 can be set.
The indicator lights up in blue when activated.
Example: When "TVS" is set.
TE
L 13942296513
Simple Start Guide
Quick Overview
A quick overview presented in this guide will
give you enough information to start using the
player for your enjoyment. To use the
surround sound features of this player, refer
to "Hookups" on page 18.
Notes
• You cannot connect this player to a TV that does
not have a video input jack.
• Be sure to disconnect the power of each
component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/video cord (pinplug × 3 y pinplug
× 3) (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• A plug adapter is included with some
models.
www
.
http://www.xiaoyu163.com
7 8 9 q;
G TVS (47)
H "BNR" (51)
I "CUSTOM PICTURE MODE" (52)
J "DIGITAL VIDEO ENHANCER"
(53)
K Playback status (NPlayback,
XPause, xStop, etc.)
m
NDisplay 3
The following playback information is
displayed.
Example: When playing a DVD.
qs qd qf qg qh
T41 – 8
3:DVD T 1:01:57
6
L TIME/TEXT icon
M Disc number and type
CHAPTER
N Title number of the DVD (44)
O Chapter number of the DVD (44)
P Playing time or remaining time (44)
m
NDisplay 4
(DVD playback only)
DOLBY DIGITAL 3/2.1
qj
Q Format of the current audio signal (47)
m
NNo display
m
NReturn to Display 1
Step 2: Inserting
Batteries into the
Remote
You can control the player using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries
to the markings inside the compartment.
When using the remote, point it at the remote
sensor on the player.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
• If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
x ao
y
i
http://www.xiaoyu163.com
8
Displaying the Control Bar in
qa
stop mode
The following displays appear when the
DISPLAY button is repeatedly pressed
during stop mode. You can make basic
adjustments and customize the player to suit
your viewing preferences.
NDisplay 1
The following settings can be made.
A
• Select QUICK to make the minimum
number of basic adjustments for using the
player.
• Select CUSTOM to make a full range of
adjustments.
• Select RESET to return the
adjustments to the default settings.
B
• Set this to limit the playback of selected
discs on this player.
NDisplay 2
Shows the same information as Display 1
during playback.
NDisplay 3
Shows the same information as Display 2
during playback.
Q Q
3 6 7 1 3
c continued
13 14
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below.
Be sure to connect the power cord last.
to LINE OUT
L/R (AUDIO)
l : Signal flow
Depending on the TV type, the image of
some discs may not fit your TV screen.
If you want to change the aspect ratio, please
refer to page 63.
When connecting to a monaural TV
Use a stereo-mono conversion cord (not
supplied). Connect the LINE OUT (VIDEO)
jack on the player to the TV's video input
jack, and connect the LINE OUT L/R
(AUDIO) jacks to the TV's audio input jack.
u163
.
15 16
1-3
2 9 9 4 2 8
NDisplay 4
Shows the same information as Display 3
during playback.
3:DVD
NNo display
QUICK
NReturn to Display 1
SETUP (61)
SETUP
PARENTAL CONTROL(55)
m
CHAPTER
m
1 5 0 5 8 2 9 9 4
CD/DVD Player
LINE OUT
to LINE OUT
TV
(VIDEO)
to video input
1
Audio/video
cord (supplied)
to audio input
For Asian/Oceanian models only
To change the color system
The color system of the player is set to NTSC
or PAL. If the on-screen menu of the player
does not appear on the TV, change the color
system of the player to the same color system
(PAL or NTSC) of your TV. To change the
color system, hold ?/1 down for a few
seconds while pressing X on the player.
z Hint
m To check the current setting of the player's color
system, press ?/1. The ?/1 indicator lights up in
green. When "NTSC" appears on the front panel
display, the color system of the player is set to
co NTSC. When "NTSC" does not appear, the color
system is set to PAL.
9 9
m
T41 – 8
T 1:01:57
m
m
2 8 9 9
3
Power source
2
Power source