Sony RMT-144A Servise Manual page 15

QQ
3 7 63 1515 0
A Connecting to your TV
This connection will use your TV speakers for sound.
CD/DVD player
to LINE OUT L/R
(AUDIO)
l : Signal flow
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV's audio
input jack.
TE
L 13942296513
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
CD/DVD player
to DIGITAL OUT
(COAXIAL)
to coaxial digital input
[Speakers]
Rear (L) Rear (R)
Subwoofer
l: Signal flow
www
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
.
http://www.xiaoyu163.com
TV
(yellow)*
(yellow)
(white)
(white)
(red) (red)
Audio/video
cord (supplied)
to audio input
c continued
. If your amplifier
C-1
.
C-2
Stereo
audio cord (not
Coaxial digital cord supplied)
(white)
(not supplied)
or
(red)
to LINE OUT L/R (AUDIO)
(white) (red)
to audio input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Front (L)
Center Rear (mono)
x ao
y
i
c continued
http://www.xiaoyu163.com
8
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
to DIGITAL OUT
(COAXIAL)
l: Signal flow
z Hint
In connection
audio/video cord instead of using a separate audio
cord.
Q Q
3 6 7 1 3
21 22
Connecting to an AV amplifier (receiver) with a digital input jack having
D
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this
player.
Front (R)
Rear (L)
Rear (R)
l: Signal flow
u163
Notes
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
.
DIGITAL" and "DTS" to "ON" in Quick Setup
(page 25). Otherwise, no sound or a loud noise
will come from the speakers.
23 24
1-5
2 9 9 4 2 8
CD/DVD player
Stereo audio cord
Coaxial digital
(not supplied)
(white)
cord (not supplied)
or
(red)
to LINE OUT L/R (AUDIO)
(white)
(red)
to coaxial digital
to audio input
input
[Speakers]
Stereo amplifier (receiver)
Front (L)
MD deck/DAT deck
Front (R)
Note
B-1 , you can use the supplied
If you select one of the TVS effects (page 47) while
playing a disc, no sound will come from your
speakers with the
B-2
1 5 0 5 8 2 9 9 4
CD/DVD player
to DIGITAL OUT
(COAXIAL)
Coaxial digital cord
(not supplied)
to coaxial digital
input
[Speakers]
AV amplifier (receiver) having
a decoder
Subwoofer
m
co
• For Asian/Oceanian models only
If your AV amplifier (receiver) has an MPEG
audio decoder function, set "MPEG" to "MPEG"
(page 67). Otherwise, no sound or a loud noise
will come from the speakers.
9 9
B-1 . If the amplifier
B-2 .
connection.
2 8 9 9
[Speakers]
Center
Front (L)
Front (R)