First Wash Cycle - Siemens Silver 2205 Operating And Installation Instructions

First Wash Cycle

This Manual: http://www.manuallib.com/file/2488819
The installation of the washing machine is
finished.(see page 40-50)
All machines are all tested in the factory. So, it
maybe left a bit little of water in the drum.
Please carry out the first wash cycle without
laundry to remove any water.
Do not load any laundry.
Turn the tape ON.
Pull the detergent drawer out as far as it will go.
Input about 1 liter of water in chamber II.
Pour half a measuring cup of detergent into
chamber II.
Do not use a special detergent for delicates or
wollens as these will create too much foam.
Turn the programme selector to Cottons/
coloureds Prewash and set the temperature
to 90 C, Ready/Wash indicator light flashes.
Press the Start/Pause button.
,, ,,
Ready/Wash and Start/Pause indicator lights
are on. The programme starts.
The Spin/End indicator light flashes if the
selected programme is ended. Start/Pause
indicator light goes out, LED display shows
,,
the buzzer emit the signal.
Turn the programme selector to O off
+
,, ,,
,, ,,
,, ,,
,, ,,
,, ,,
.
17