Fora TNG VOICE Owner's Manual page 16

At the pre-set alarm time, the meter will beep and automatically turn on.
You can press Main button to mute the alarm and insert a test strip to
begin testing. If you do not press Main button, the meter will beep for 2
minutes and then switch off. If you do not want to test at this time, press
Main button to switch off the meter.
Congratulations! You have completed all settings!
NOTE:
• These parameters can ONLY be changed in the setting mode.
• If the meter is idle for 3 minutes during the setting mode, it will switch off
automatically.
16
8. Setting the Auto-Send
Press Main button to select the auto-send
On or OFF. Press SET.
NOTE: This function is referring to the
Bluetooth data transmission. If On is
selected, your result will be transmitted
automatically right after the test.