Oregon Scientific EMR899HGN User Manual page 4

Follow these steps to install / replace batteries:
1. Remove the screws on the battery compartment.
2. Select the channel number on the CHANNEL slide switch.
3. Select the temperature display unit on the
4. Insert the batteries strictly according to the polarities shown
therein.
5. Replace the battery compartment door and secure its screws.
Replace the batteries when the low-battery indicator of the particular
channel lights up on the main unit. (Repeat the steps described in
section "BEFORE YOU BEGIN")
Note that once a channel is assigned to a remote unit, you can
only change it by removing the batteries or resetting the unit.
EMR899_EN_R3
BATTERY INSTALLATION: MAIN UNIT
The main unit uses two (2) UM-3 or "AA" size alkaline batteries.
°C/°F
slide switch.
Follow these steps to install / replace batteries:
1. Slide open the battery compartment door.
2. Insert the batteries strictly according to the polarities shown
therein.
3. Replace the battery compartment door.
Replace the batteries when the low-battery indicator of the indoors
temperature lights up. (Repeat the steps described in section
"BEFORE YOU
4
4
BEGIN")
If not disposed of properly, batteries can be harmful.
Protect the environment by taking exhausted batteries
ot authorized disposal stations.
8/30/04, 11:36 AM