Checking The Brake Fluid Level - Yamaha YZF-R6 Owner's Manual

Rear
1. Brake pad wear indicator groove
2. Install the brake caliper by install-
ing the bolt, then tightening it to the
specified torque.
Tightening torque:
Brake caliper bolt:
40 Nm (4.0 m·kgf)
PERIODIC MAINTENANCE AND MINOR REPAIR
Front
1. Minimum level mark

Checking the brake fluid level

Insufficient brake fluid may allow air to
enter the brake system, possibly caus-
ing it to become ineffective.
Before riding, check that the brake fluid
is above the minimum level mark and
replenish if necessary. A low brake flu-
id level may indicate worn brake pads
and/or brake system leakage. If the
brake level is low, be sure to check the
brake pads for wear and the brake sys-
tem for leakage.
6-28
Rear
1. Minimum level mark
Observe these precautions:
EAU03294
G
When checking the fluid level,
make sure that the top of the brake
fluid reservoir is level.
G
Use only the recommended quali-
ty brake fluid, otherwise the rubber
seals may deteriorate, causing
leakage and poor braking perfor-
mance.
Recommended brake fluid: DOT 4
G
Refill with the same type of brake
fluid. Mixing fluids may result in a
harmful chemical reaction and
lead to poor braking performance.
6