Handlebar Switches - Yamaha YZF-R6 Owner's Manual

1. Pass switch "PASS"
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "

Handlebar switches

Pass switch "PASS"
Press this switch to flash the headlight.
Dimmer switch " /
Set this switch to " " for the high
beam and to " " for the low beam.
INSTRUMENT AND CONTROL FUNCTIONS
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
EAU00118
EAU00120
EAU03888
"
EAU03889
/ "
". To signal a left-hand
". When
EAU00129
"
3-8
1. Engine stop switch " / "
2. Light switch " / / "
3. Start switch " "
Engine stop switch " /
Set this switch to " " before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the motorcycle over-
turns or when the throttle cable is
stuck.
Light switch " / /
Set this switch to " " to turn on the
auxiliary lights, meter lighting and tail-
lights. Set the switch to "
the headlight also. Set this switch to
" " to turn off all the lights.
3
EAU03890
"
" to
EAU03955
"
" to turn on