Drive Select Lever; Recoil Starter - Yamaha GRIZZLY 660 YFM66FAV Owner's Manual

1. Drive select lever

1. Levier de présélection
1. Palanca de selección de marcha

1. Recoil starter

1. Lanceur à réenroulement
1. Arranque por tracción de cable
Drive select lever
The drive select lever is used to shift your machine
into the low, high, neutral, reverse and park posi-
tions. (Refer to pages 6-11–6-15 for the drive se-
lect lever operation.)
Recoil starter
Firmly grasp the handle and pull slightly until en-
gagement can be felt. Then pull forcefully, being
careful not to pull the rope all the way out.
WARNING
_
Always shift the drive select lever to "P" park
position before starting the engine, otherwise
the ATV could start to move unexpectedly,
which could cause an accident.
_
4-45
EBU00608
EBU00975