Lubricating The Drive Chain - Yamaha GRIZZLY 125 YFM125GZ Owner's Manual

1
2
3
1
4
5
6
1. Measurement A
7
6. Tighten the hub stopper bolt, and then its lock-
nut.
8
EBU24881
9

Lubricating the drive chain

The drive chain must be cleaned and lubricated at
10
the intervals specified in the periodic maintenance
and lubrication chart, otherwise it will quickly wear
11
out, especially when riding in dusty or wet areas.
Service the drive chain as follows.
1. O-ring
ECB00560
NOTICE
The drive chain must be lubricated after wash-
ing the ATV or riding in the rain.
1. Clean the drive chain with kerosene and a
small soft brush. NOTICE: To prevent dam-
aging the O-rings, do not clean the drive
chain with steam cleaners, high-pressure
washers or inappropriate solvents.
2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive chain with a
special O-ring chain lubricant. NOTICE: Do
8-35
1
[ECB00571]