Yamaha YZF-R1 Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
3. Push the "SELECT" button again
to reset the stopwatch.
Split time measurement
1. Push the "RESET" button to start
the stopwatch.
2. Push the start switch "
SET" button to measure split
3
times. Split times are displayed on
the odometer display for five sec-
onds.
3. Push the start switch "
SET" button to display the final
split time or push the "SELECT"
button to stop the stopwatch and
display the final split time.
Split time history
" or "RE-
1. Coolant temperature display/air intake tem-
" or "RE-
perature display
2. Stopwatch
The split time history displays up to 20
stored split times. The split time history
can be displayed either in reverse chro-
nological order or by speed.
1. Push the "SELECT" button for at
least one second to select the re-
verse chronological order mode;
"L-20" displays on the stopwatch.
Push the "SELECT" button again
to select the speed mode; "F-20"
displays on the stopwatch.
TIP
1
2
2. Push the "RESET" button. De-
3. Push the "SELECT" button to
TIP
3-11
● Reverse chronological
mode: The split times are shown
from the latest to earliest (i.e., L1,
L2, L3, L4).
●
Speed order mode: The split times
are shown from the fastest to slow-
est (i.e., F1, F2, F3, F4).
pending on the selected split time,
"L1" or "F1" displays on the coolant
temperature display/air
temperature display, and its corre-
sponding stored split time displays
on the stopwatch.
switch the displayed split time in
ascending order (i.e., 1, 2, 3, 4),
and the "RESET" button to switch
the displayed split time in de-
scending order (i.e., 20, 19, 18,
17).
● To switch between the reverse
chronological order mode and the
speed mode, push the "SELECT"
button for at least one second to
order
intake