Yamaha FZ1-S Owner's Manual page 33

Spring preload setting:
Minimum (soft):
8
Standard:
5.5
Maximum (hard):
0
Rebound damping force
1. Rebound damping force adjusting screw
The rebound damping force is adjusted
on the right front fork leg only. To in-
crease the rebound damping force and
thereby harden the rebound damping,
turn the adjusting screw in direction (a).
To decrease the rebound damping
force and thereby soften the rebound
damping, turn the adjusting screw in di-
rection (b).
INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
Be sure to perform this adjustment on
the right front fork leg.
Rebound damping setting:
Minimum (soft):
26 click(s) in direction (b)*
Standard:
18 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
Compression damping force
1. Compression damping force adjusting screw
The compression damping force is ad-
justed on the left front fork leg only. To
increase the compression damping
3-19
force and thereby harden the compres-
sion damping, turn the adjusting screw
in direction (a). To decrease the com-
pression damping force and thereby
soften the compression damping, turn
the adjusting screw in direction (b).
NOTE:
Be sure to perform this adjustment on
the left front fork leg.
Compression damping setting:
Minimum (soft):
26 click(s) in direction (b)*
Standard:
5 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
3
ECA10100