Starting A Warm Engine; Operating The Drive Select Lever And Driving In Reverse - Yamaha GRIZZLY 350 YFM35FGW Owner's Manual

NOTE:
The engine is warm when it responds normally to
the throttle with the starter (choke) turned off.
EBU20291

Starting a warm engine

Follow the same procedure as for starting a cold
engine, with the exception that the starter (choke)
is not required when the engine is warm. Instead,
start the engine with the throttle slightly open.
6 EBU20380
Operating the drive select lever and
driving in reverse
ECB00170
CAUTION:
Before shifting, stop the ATV, otherwise the
transmission may be damaged.
Shifting: Forward
1. Bring the ATV to a complete stop.
2. Shift from neutral to forward and vice versa by
moving the drive select lever along the shift
guide.
NOTE:
Make sure that the drive select lever is completely
shifted into position.
1. Drive select lever
2. F (Forward)
3. N (Neutral)
4. R (Reverse)
3. Open the throttle lever gradually.
Shifting: Reverse
1. Bring the ATV to a complete stop.
2. Apply the brake pedal.
6-3