Checking And Lubricating The Brake Pedal; Checking The Wheel Bearings; Lubricating The Drive Shaft Universal Joint - Yamaha GRIZZLY 350 YFM35FGW Owner's Manual

EBU24950
Checking and lubricating the brake
pedal
The operation of the brake pedal should be
checked before each ride, and the pedal pivot
should be lubricated if necessary.
NOTE:
To access the brake pedal pivot, remove panel A.
(See page 8-8.)
Recommended lubricant:
Lithium-soap-based grease (all-purpose
grease)
EBU24961

Checking the wheel bearings

The front and rear wheel bearings must be
checked at the intervals specified in the periodic
maintenance and lubrication chart. If there is play
in a wheel hub or if a wheel does not turn smoothly,
have a Yamaha dealer check the wheel bearings.
EBU24980
Lubricating the drive shaft universal
joint
The drive shaft universal joint must be lubricated at
the intervals specified in the periodic maintenance
and lubrication chart.
8-34
8