Installation - Beko MWOTR 30100 SS User Manual

Hide thumbs Also See for MWOTR 30100 SS:
Table of Contents

Advertisement

Installation

3
• Remove all packing material and accessories.
Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
• Remove any protective film found on the
microwave oven cabinet surface.
3.1 Installation
1. Select a level surface that provide enough open
space for the intake and/or outlet vents.
12 inch(30cm)
3.0 inch(7.5cm)
OPEN
3.0 inch(7.5cm)
A minimum clearance of 3.0 inch (7.5cm) is re-
quired between the oven and any adjacent wall.
One side must be open.
Do not remove the light brown Mica cover that is
screwed to the oven cavity to protect the magne-
tron.
– Leave a minimum clearance of 12 inch(30cm)
above the oven.
– Do not remove the legs from the bottom of
the oven.
– Blocking the intake and/or outlet openings
can damage the oven.
– Place the oven as far away from radios and
TV as possible.Operation of microwave oven
may cause interference to your radio or TV
reception.
2. Plug your oven into a standard household
outlet. Be sure the voltage and the frequency is
the same as the voltage and the frequency on
the rating label.
Over The Range Microwave Oven / User Manual
WARNING: Do not install oven
A
over a range cooktop or other
heat-producing appliance. If in-
stalled could be damaged and the
warranty would be void.
13 / 19 EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mwotr 30100 bl

Table of Contents