Using The Accessories - Kärcher G 3500 OCT Manual

STEP 8:
Connect garden hose to unit`s water inlet.
STEP 9:
Connect garden hose to the cold water
source and turn water completely on.
Do not use hot water.
STEP 10:
Unlock the trigger gun safety lock. Trigger
the gun to eliminate trapped air, wait for a
Quick connect nozzles
The color-coded quick connect nozzles pro-
vide a wide array of spray widths from 0° to
65° and are easily accessible when placed
in the convenient nozzle holder.
0° spray angle = Red nozzle
For particularly stubborn accumulation of
grime. Not recommended for soft materials
like sidings, decks, painted surfaces, cars.
15° spray angle = Yellow nozzle
For dirt accumulation over a surface.
25° spray angle = Green nozzle
For dirt accumulation over a large surface.
8 English
OPERATING INSTRUCTIONS
steady fl ow of water to emerge from the
spray nozzle.
STEP 11:
Open fuel valve. Pull the choke rod to the
"ON" position (on a warm engine, leave
the choke rod in the OFF position).
STEP 12:
Move the engine stop switch to the "ON"
position.
STEP 13:
Pull the starter handle. If the engine fails
to start after 3 pulls, squeeze the trigger
gun to release pressure, and repeat step.
After the engine warms up enough to run
smoothly move choke rod to OFF position.
For engine details see engine manual.

USING THE ACCESSORIES

40° spray angle = White nozzle
For moderate dirt accumulation over a large
surface.
65° spray angle = Black nozzle
For operating with detergents or cleaning
with low pressure.
CAUTION
High pressure in nozzle area. Risk of injury
caused by improperly locked nozzle.
■ Make sure you hear the "click" when in-
serting the nozzle tip into the quick con-
nection.
■ Pull the nozzle to make sure it is seated
properly before operating your unit. (See
OPERATING INSTRUCTIONS: Step 1)
WARNING
To avoid serious injury never point spray
nozzle at yourself, other persons or ani-
mals.