Wind; Moon Phase; Bar Chart; Alarm - Oregon Scientific WMR200A User Manual

41°C to 54°C
Danger
(105°F to 129°F)
54°C to 92°C
Extreme danger
(130°F to 151°F)
NOTE Heat index is only calculated when temperature is 80° F / 27°C or above.

WIND

To select wind display mode:
Press wind area to toggle between:
• Gust
• Average
Press UNIT to select unit: knots / kph / mph / m/s.
The wind level is shown by a series of icons:
Lost
Light Moderate
sensor
0-8 mph
9-25 mph
(14-41 km/h)
(3-13 km/h)

MOON PHASE

1. Press clock area to activate.
2. Press SET repeatedly to display Year / Calendar date.
3. Press UP / DWN to view moon phase for specific dates.
New Moon
Waxing Crescent
First quarter
Waxing Gibbous

BAR CHART

To select chart display mode:
Press bar chart area to toggle between these chart displays:
• Barometer
• Rain
• UV

ALARM

Weather alarms are used to alert you of certain weather conditions. Once activated,
the alarm will turn off when a certain criterion is met.
Area Type of alarm
Barometer Barometer
Rain Rain rate
UV UV
Temperature Current Temperature
Heat Index
Humidity Current Humidity
Dew Point
Clock Daily Alarm
Gust Wind Speed
Wind
Low Wind Chill
To set the alarm:
1. Press desired area to activate.
2. Press ALARM to display Time and HI / LO alarm.
3. Press and hold ALARM.
Heat exhaustion likely
Strong risk of dehydration / sun
stroke
Strong Storm
26-54 mph >55 mph (>88
(42-87 km/h) km/h)
Full Moon
Waning Gibbous
Last quarter
Waning Crescent
HI
HI
HI
HI
LO
HI
HI
LO
HI
LO
HI
LO
9
4. Press UP / DWN to set the desired values.
5. Press
• ALARM to confirm and continue to next setting OR.
• touch anywhere on the screen (except tool bar / weather forecast area) to
confirm and exit.
To enable / disable alarms:
1. Press desired area to activate.
2. Press ALARM to display set Time and HI / LO alarm.
3. Press ALARM ON/OFF to turn alarm ON / OFF.
"- -" indicates alarm is not set / disabled.
NOTE Clock alarm sound is different from weather alarms to allow for easy
differentiation by user.
To silence any alarm: Press anywhere on the screen.
NOTE will continue flashing, despite silenced alarm, for at least 2 minutes or
until condition ceases.
NOTE When alarm is on, the channel of triggered alarm will be displayed.

MEMORY

MAX / MIN RECORDS

Area Type of Memory
Temperature Current Temperature
Heat Index
Humidity Current Humidity
Dew Point
Wind Gust Wind Speed
Wind Chill
To view MAX / MIN records:
1. Press desired area to activate.
2. Press MEM to toggle between MIN / MAX recorded values.
To clear individual area records:
1. Press desired area to activate.
2. Press and hold MEM.
3. Delete process is complete when display shows current reading.

HOURLY RECORDS

Display
Barometer
Hourly Rainfall
UV
To view hourly records:
1. Press desired area to activate.
2. Press UP / DWN to view current (0) / hourly reading.
When MAX / MIN reading is displayed, the corresponding timestamp will be
displayed in the clock area .

DATA LOGGER

To set DATA LOGGER:
1. Press clock area until DATA LOGGER mode is displayed.
2. Press SET.
3. Press UP / DWN to select frequency of data recording (1 / 2 / 5 / 10 /15).
4. Press SET.
5. Number of days memory will allow for records will be displayed.
No. of days available for data logging with Memory
Frequency in minutes
available*
1 29
2 58
5 145
10 291
15 436
* based only on all provided sensors in this package being used, and after all memory
has been cleared.
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
Hourly readings of up to
24 hours back
24 hours back
10 hours back