Setup
Note: Determine the left and right sides of the machine
from the normal operating position.
Loose Parts
Note: Use the chart below to identify parts used for assembly.
DESCRIPTION
Gage wheel
Shoulder bolt
Locknut, 3/8 in. (with patch on threads)
Rear link bracket
Washer, 1/2 in.
Cotter pin, 1 in.
Adjustable links
Washer
Cotter pin, 1 in.
Grass deflector
Spring
Bolt, 3/8 x 3-1/2 in.
Locknut, 3/8 in.
Up stop
Hairpin cotter, 3-3/8 in.
Washer, 3/4 in.
Link pin
Hairpin cotter, 2-9/16 in.
Washer
Operator's Manual
Warranty card
Important
If you have a 1999 or earlier tractor and are
installing a 2000 or later 52 in. deck, a kit will be needed to
install the deck. Obtain this kit from an Authorized Service
Dealer.
QTY.
2
Install gage wheels
2
2
1
Install rear link bracket
2
2
2
Install front mount to mower
2
2
1
2
Install grass deflector
2
2
1
Install mower up stop
2
2
1
Install mower to tractor
3
3
1
Read before operating
1
Preparing the Mower
1. Attach gage wheels to the outside of arms on rear
carrier assembly. Grease fitting on wheel must face in
(Fig. 2).
2. Secure with shoulder bolt and lock nut (3/8 in.), with
internal locking patch on threads (Fig. 2).
4
USE