Storage - Toro 78281 Operator's Manual

8. Run mower again for one to three minutes to remove
excess water.
1
3
4
Figure 30
1. Washout fitting left
2. Coupling (not supplied)
2
m–3473
3. Hose
4. Washout fitting right
18
Warning
A broken or missing washout fitting could expose
you and others to thrown objects or blade contact.
Contact with thrown debris or blade contact will
cause injury or death.
Replace broken or missing washout fitting
immediately, before using mower again.
Plug any holes in mower with bolts and
locknuts.
Never put your hands or feet under the mower
or through openings in the mower.

Storage

1. Clean dirt and chaff from the outside of the engine's
cylinder head fins and blower housing. Also remove
grass clippings, dirt, and grime from the external parts
of the entire machine, especially the engine, shrouding,
and the top of the mower.
2. Wash the underside of the mower; refer to Washing
Underside of Mower, page 17.
3. Check the condition of the blade(s); refer to Cutting
Blade, page 14.
4. Check the condition of the blade drive belt.
5. Grease the mower deck; refer to Greasing and
Lubrication, page 16.
6. Check and tighten all bolts, nuts, and screws. Repair or
replace any part that is damaged or defective.
7. Paint all scratched or bare metal surfaces. Paint is
available from your Authorized Service Dealer.
8. Store the machine in a clean, dry garage or storage area.
Remove the key from the ignition switch and keep it in
a memorable place. Cover the machine to protect it and
keep it clean.