Table of Contents
Advertisement
2. Squeeze the button on the lever with your thumb
and fully insert the mulch plug into the opening
(Figure 8).
3. Release the button on the lever and ensure that the
top of the lever is lies fully in the switch channel
(Figure 9). If the top of the lever is not in the
switch channel, your mower will not start!
Figure 7
Figure 8
Figure 9
Note: If the lever does not latch properly,
disconnect the wire from the spark plug and check
for and remove any debris buildup in the tunnel.
Product Overview
4
3
2
1
1. Spark plug
2. Cutting height lever (4)
3. Air filter
4. Fuel tank cap
5. Recoil start handle
6. Blade control bar
7
6
5
11
G012204
Figure 10
7. Self-propel drive bar
8. Blade control button
9. Ignition switch
10. Handle knobs
11. Oil fill/Dipstick
7
8
9
10
Advertisement
Table of Contents
