System Requirements; Setup Wizard - D-Link DCS-942L Quick Installation Manual

Wireless n day/night home network camera

Hide thumbs Also See for DCS-942L:

Table of Contents

Available languages

SySTEm rEQUIrEmENTS

• Computer with Microsoft Windows

• PC with 1.3GHz or above; at least 128MB RAM

• Internet Explorer 7 or above , Firefox 3.5 or above, Safari 4 and Chrome 8.0 or above

• Existing 10/100 Ethernet-based network or 802.11n wireless network

PrODUCT SETUP

Step 1:

Connect the included Ethernet cable to the network cable connector located on the bottom panel of the

DCS-942L and attach it to the network.

Step 2:

Attach the external power supply to the DC power input connector located on the bottom panel of the

DCS-942L and connect it to your wall outlet or power strip. Power is confirmed when the green LED

Power Indicator located below the lens is lit.

Step 3:

Insert the DCS-942L Driver CD in the CD-ROM drive. If the CD Autorun function does not automatically

start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D: represents

the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears, click Install

and follow the on-screen instructions.

Step 4:

Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to

finish setting up your camera.

DCs-942l

7, Vista

, or XP (for CD-ROM Setup Wizard), Mac OS or Linux

Table of Contents