Dispensing Hot Milk - Saeco PRIMEA TOUCH PLUS Operation And Maintenance Manual

If the user wishes to continue preparing other drinks the machine
will keep the "milk rinsing" signal active.
After 20 minutes of inactivity, the machine requires the user to
perform a rinsing cycle as described in Step 7. If the machine is
turned off immediately after dispensing a milk product, the next
time the machine is turned on it will require the user to perform a
rinsing cycle.
Note: Before performing the "milk rinsing" function, make sure of
the following:
1. and adequate zised container is placed under the brew unit.
2. the milk container with the cappuccinatore is fi lled with fresh
drinking water and inserted in the machine.
3. the water tank is full of fresh water.
7
milk rinsing cycle
rinse the milk tank
Remove the milk container from the
machine; if it sill contains milk, put it
back in the refridgerator
for later use and substitute the
additional container.
Rinse the container and fi ll with fresh
water, place it in the machine and
press the "start rinsing"
button.

DISPENSING HOT MILK

1
show icon
my custom
explanation coffee
Press the hot milk icon once.
8
start
rinsing
While the machine is rinsing the
user cannot interrupt the cycle,
but must wait until the cycle is
completed. Once completed the
machine returns to the main menu.
THIS PROCEDURE MUST BE PERFORMED FOR ALL
MILK PRODUCTS!
2
program-
ming
menu
The hot milk is dispensed.
rinsing milk department-
please wait
rinsing...
hot
milk
stop
milk
dispensing
milk
show icon
my custom
explanation cleaning coffee
9
Remove the container, rinse
and dry.
Fill the milk container
To dispense another cup of milk,
repeat this operation.
When the "milk rinsing" symbol
fl ashes, clean the milk circuits as
described for latte macchiato (see
page 12, Step 6).
13
program-
ming
menu