Beverage Programming; Dispensing Hot Milk; Beverage Programming Menu; Espresso / Coffee / Long Coffee Program - Saeco Primea Touch Plus Operation And Maintenance Manual

DISPENSING HOT MILK

1
show icon my custom
explanation coffee
Press the hot milk icon once.

BEVERAGE PROGRAMMING MENU

Each beverage can be programmed according to your individual taste. Customization is shown on the
display with the addition of an asterisk.
To program the desired beverage:
show icon my custom
explanation coffee
Hold down the beverage button for
two seconds

ESPRESSO / COFFEE / LONG COFFEE PROGRAM

1
show icon
my custom
explanation coffee
Enter the menu of the beverage to
be customized by pressing and
holding the button for 2 seconds.
2
program-
ming
menu
The hot milk is dispensed.
or
program-
show icon
ming
explanation
menu
Press the button "my coffee" and
within two seconds, press the
beverage button
select the quantity
of coffee to be
ground (aroma).
return to the
program-
ming
menu
Selecting a different quantity of coffee changes the aroma of the beverage.

BEVERAGE PROGRAMMING

hot
milk
stop
milk
dispensing
program-
my custom
ming
coffee
menu
In this menu you can:
2
light
espresso
medium
strong
previous
restore
go
settings
back
window.
restore factory settings.
Fill the milk container
To dispense another cup of milk,
repeat this operation.
When the "milk rinsing" symbol
fl ashes, clean the milk circuits as
described for latte macchiato
(see page 12, Step 6).
Once a beverage has been
customized it will only
dispense that type of
beverage. To change or modify
the beverage a new customi-
zation must be done.
my
start!
select the use
of pre-ground
preground
coffee.
save
settings
save settings.
15