List Of Messages - Canon POWERSHOT A620 User Manual

List of Messages

The following messages may appear on the LCD monitor during
shooting or playback. Please refer to the Direct Print User Guide for
the messages that display during a printer connection.
Busy...
Image is being recorded to, or read from, memory card. The
playback mode is starting up.
No memory card
You turned on the camera without a memory card installed.
Card locked!
The SD memory card is write-protected.
Cannot record!
You attempted to shoot an image without a memory card
installed, or attempted to attach a sound memo to a movie.
Memory card error
Memory card has experienced an anomaly.
Memory card full
Memory card is full of images and no more can be recorded or
saved. Or no more image settings or sound memos can be
recorded.
Naming error!
The image could not be created because there is an image with
the same name as the directory that the camera is attempting to
create, or the highest possible file number has already been
reached. In the Set up menu, set [File No. Reset] to [On]. Save
all the images you wish to retain onto a computer, then reformat
the memory card. Please note that formatting will erase all the
existing images and other data.
Change the batteries
Battery charge is insufficient to operate the camera. Replace all
4 batteries immediately with unused AA-size alkaline batteries or
fully charged Canon AA-size NiMH batteries.
Downloaded From camera-usermanual.com Canon Manuals
102