Canon POWERSHOT A620 User Manual page 64

Setting the Camera to the Color Accent
Mode
Colors other than the color specified in the LCD monitor are
shot in black and white.
1
The camera will switch to color
input mode and the display will
alternate between the original
image and the color accent
image (using the previously set
color).
2
Aim the camera so that the color you
wish to retain appears at the center of
the LCD monitor and press the
Only one color can be specified.
You can use the
of colors that are retained.
–5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to
3
This completes the setting.
If you press the MENU button at this point, you will
return to the screen where you can select a My Colors
mode.
The default color accent is green.
You may not obtain the expected results after color
input mode if you use the flash, or change the white
balance or metering settings.
The specified color accent is retained even if the
camera's power is turned off.
Downloaded From camera-usermanual.com Canon Manuals
62
(Color Accent)
See Menus and Settings (p. 22).
retain.
.
.
or button to specify the range
button.