Electrolux ei28bs55is1 Use And Care Manual page 22

Controls
22
Setting cooling temperatures
1 Touch the control panel to illuminate plus
(+) and minus (-) indicators on either side
of the temperatures displays.
2 Press the + or – indicator to adjust the
temperature to the desired setting.
The temperature display will begin to
blink with the first touch. The display will
time out after a minute and returns to the
basic display.
Alarms
Door Ajar
High Temp
If the door has been left
open for an extended period
of time, an alarm will sound
and the door ajar indicator
will display on the right side
of the control panel. The
alarm is turned off by closing
the door. The mute sounds
key will blink to prompt the
reset of any pending alarms.
Press this key to reset any
system alarms.
In the event of a high
temperature condition, the
temperature display will blink
and display "HI". After 20
minutes, the high temp alert
will be displayed and the
alarm off icon will illuminate
until pressed, acknowledging
the alarm, at which time the
highest temperature reached
will be displayed and the
refrigerator will resume
normal operation. All other
modes are turned off until
the alarm is acknowledged.
Power Fail
In the event of a power
failure, the power fail alert
will be displayed and the
temperature display will blink
until the mute sounds icon is
pressed, acknowledging the
alarm. Other modes may be
turned off until the alarm is
acknowledged. The power
fail alert is turned off and
the refrigerator will resume
normal operation. The
high temp alarm may also
be illuminated until a safe
operating range temperature
has been reached.