Table of Contents
Advertisement
Time
The dishwasher is delivered with the
time of day (clock) display deactivated.
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a sensor has been
pressed or after the end of a pro-
gramme.
Setting the time of day (clock) display
When the time of day (clock) display
has been activated, the current time of
day will appear in the display a few
minutes after the last time a sensor has
been pressed or after the end of a pro-
gramme.
Select the
Display
Select the setting you want and con-
firm with
OK
.
With the
Night dimming
of day is automatically switched off at
night.
If you have selected
ming
, confirm the message about
higher energy consumption with
Setting the clock format
You can select either a 24 hour or 12
hour clock.
Select the
Clock format
Select the setting you want and con-
firm with
OK
.
option.
option the time
On
or
Night dim-
OK
option.
Setting the time of day
You can set the current time of day.
The current time of day must be set be-
fore you can use the "
gramme option.
Select the
Set the hours with
with
.
OK
Then set the minutes and confirm
with
OK
.
The time of day has now been saved.
Date
You can set the actual date and show it
in the display.
Set the year with the
confirm with
Then set the month and the day and
confirm them both with
.
Settings menu
Delay start
Set the time
option.
+/-
and confirm
+/-
sensors and
OK
.
OK
pro-
93
Advertisement
Table of Contents
