Display - Miele G 6920 Operating Instructions Manual

Display

General
The display is used to select or set the
following:
– the programme
– any extras
– the delay start function
– the Settings  menu
– information
The display can show the following:
– the programme name
– the stage the programme is at
– the current time of day and the date
– the estimated time left for the pro-
gramme to run
– the energy and water consumption
(EcoFeedback)
– any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensors during this
time.
To switch the dishwasher back on
again, press the  sensor.
Guide to the appliance
A dash  in the display next to a sensor
indicates that a function can be selec-
ted with that sensor. The relevant
sensor lights up.
The scroll bar  on the right of the dis-
play indicates that more options or
more text are available which can be
displayed by touching the relevant illu-
minated sensor.
A dotted line will appear under the last
option available in a list.
OK is used to confirm a message or set-
ting and also to move to the next menu
or another level.
A tick  will appear beside the option
which is currently selected.
To exit a sub-menu, touch the Back
sensor .
If you do not press any of the sensors
for several seconds, the display will re-
turn to the previous level. You may need
to enter your settings again.
The Settings  menu is used to alter
the dishwasher's electronics to suit
different requirements (see "Settings").
7