Toro 04520 Operator's Manual page 18

Parking-Brake Lever
Pull up on the brake lever
Disengage it by pulling up on the release latch and lowering
the brake handle. Lock the parking brake any time you leave
the machine.
Figure 14
1. Parking-brake lever
Backlap Lever
The backlap lever is located under the plastic cover to the left
of the seat. Use the backlap lever
with the raise/lower mow control lever and the reel speed
control for backlapping the reels.
1
Figure 15
1. Backlap lever—mow
position
Reel-Speed Control
The reel–speed control is located under the plastic cover to
the left of the seat. Use the reel-speed control
adjust the rpm of the reels.
(Figure 14) to set the parking brake.
2. Release latch
(Figure 15) in conjunction
2
2. Backlap lever—backlap
position
(Figure
1. Reel-speed control
Seat-Adjusting Lever
The seat-adjusting lever is located on the front, right corner
of the seat (Figure
and aft.
Note: If you need additional adjustment on the seat, you can
remove the four bolts securing the seat to the base and move
the seat to the second set of mounting holes provided.
1
g014620
1. Seat-adjusting handle
16) to
18
Figure 16
17), allowing you to adjust the seat fore
Figure 17
1
g014623
g014628