MTD 190-032-10 Operator's Manual page 7

CONTENTS OF CARTON
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton
contents are listed below and shown in Figure 3. Hardware part numbers are shown in parentheses.
• One Auger Housing Assembly w/ Lower V-belt
• One Undercarriage Assembly (w/ Upper V-belt 754-0371A)
• One Idler Assembly w/ Extension Spring (732-0594A)
• One Idler Pulley (756-0627B) and Pin (650-0040) w/ Hair Pin Clip (714-0145)
• One Belt Keeper (747-04135) w/ Bell Washer (736-0270) Jam Nut (712-0298) & Hex Nut (712-3006)
• One Lift Handle Assembly
• One Upper Chute Crank Rod
• One Chute Directional Support w/ Tilt Lever
• Five Cable Ties (725-0157)
• Two Spare Shear Pins (738-04124) & Cotter Pins (714-04040)
• One Cotter Pin (714-0507)
• Two Self-adhesive Reflectors (730-3000)
• One Upper V-belt (754-0481)
• One Upper V-belt (754-0435)
• One Upper V-belt (754-0490)
• One Upper V-belt (754-0498)
• Left & Right Assembly Brackets (683-04215 & 683-04214) & Hardware (710-0514 Hex Screw, 712-04065
Flange Nut, 738-0143 Shoulder Screw & 712-04063 Flange Nut)
• Belt Keeper (711-1000) & Flange Lock Nut (712-04063 )
• Wing Nut (712-04100)
• 16mm Clamp (726-0354)
• Extension Spring (732-04237)
• Clevis Pin (711-0332)
• Click Pin (714-0145)
7
3
Carton
Contents
If you are missing
any parts, please
do not contact the
retailer where you
purchased this unit,
call MTD directly at
1-330-220-4MTD
or toll free at
1-800-800-7310.