Advertisement
Optional:
For more advanced pilots i would recommend to try to called TV (Trust vector control)
system. This mean motor will be moving to sides mixed ore connected ro rudder. Such upgrade will
allow you to make some crazy maneuvers. Here you can see construction of such system. I use ball
links connected to motor for smoth and noise free system. Please have in mind that ussualy motor
wirres do not hold constant bending. Please wind wirres as shown in picture, this way much more
flexible wirre from Castle Creation Phoenix 10A esc will be bending. I had none problems so far with
such mounting of wirres.
Depron cut out for motor with TVR system.
AXI2203/Race motor, view from front.
Here you can see motor
already installed in place. TV
system add allot of forces to
motormount area, so as you
can see i use fiberglas clot to
increase strenght in this
place. Also you can see
Castle Creation controller
ready for final instalation.
Mount Controller about 5cm
from motormount. Move
engine full way to left and
only then attach ESC, this
will allow wirres be without
tension.
16
Advertisement
