Motorola APX 7000 User Manual page 129

Changing Your Tactical Inhibit Password
1
or to Pswd.
2 Press the Menu Select button directly below
Pswd.
The display shows Change Password screen.
3 or to Tactical Inh Encode Pswd.
4 Press the Menu Select button directly below Sel.
5 Enter the old password.
6 Press the Menu Select button directly below Ok.
7 Enter the new password.
8 Press the Menu Select button directly below Sel.
9 Re-enter the new password.
10 Press the Menu Select button directly below Sel.
The password is updated.
If the two passwords do not match, repeat Steps
through 10.
Note: If you enter three incorrect old passwords,
the radio exits the password feature. You cannot
access this feature again until you turn the radio
off and on.
Enabling or Disabling the Radio Lock Feature
(Secure Radios Only)
This feature allows you to enable or disable the radio
lock feature. It is programmable by a qualified radio
technician.
1
or to Logf.
2 Press the Menu Select button directly below
Logf.
One of the following results occur.:
• The display shows Pswd enabled, indicating that
the radio lock feature is enabled.
• The display shows Pswd disabled, indicating that
the radio lock feature is disabled.
5
125
English