bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (×6
7.25. Remove the K-Board and S-
1. Remove the Cabinet assy. (See section 7.24.)
2. Remove the screws (×2
Board shield.
3. Remove the screws (×3
Board unit.
).
4. Disconnect the connector (S2).
5. Remove the screws (×2
6. Disconnect the connector (K1).
7. Remove the screws (×1
24
Board
) and remove the K and S-
) and remove the K and S-
) and remove the S-Board.
) and remove the K-Board.