7.7.
Remove
cover
1. Remove the screws (×4
2. Remove the Rear Terminal cover.
7.8.
Remove the A-Board unit
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A1, A3, A5, A6, A7, A11, A12,
A30, A51 and A52).
3. Remove the screws (×4
unit.
7.9.
Remove the A-Board
1. Remove the A-Board unit. (See section 7.8.)
2. Remove the screws (×8
the
Rear
Terminal
, ×2
).
) and remove the A-Board
) and remove the A-Board.
7.10. Remove the Side control unit
assy
1. Disconnect the connectors (A52). (See section 7.8.)
2. Remove the screws (×4
unit assy.
7.11. Remove the GS-Board and the
Control button
1. Remove the Side control unit assy. (See section 7.10.)
2. Remove the screws (×2
3. Disconnect the connectors (GS52) and remove the GS-
Board.
4. Remove the screws (×2
5. Remove the Side control mount metal from Side control
19
) and remove the Side control
).
)