metal frame.
6. Remove the screws (×2
panel bottom and the Control button.
) and remove the Side control
7.12. Remove the Side terminal unit
assy
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (GH11 and G51).
3. Remove the screws (×3
nal unit assy.
7.13. Remove the G-Board and the
GH-board
1. Remove the Side terminal unit assy. (See section 7.12.)
2. Remove the screws (×2
3. Remove the Side terminal shield.
4. Remove the Side terminal panel bottom.
5. Remove the screws (×2
20
) and remove the Side termi-
) from back side.
,×2
).