BMW K 1600 GT Rider's Manual page 87

when the ignition is switched on.
The anti-theft alarm system indi-
cator lamp then signals the rea-
son for the alarm for one minute.
The meanings of the flash codes
are as follows:
1 flash: motion sensor 1
2 flashes: motion sensor 2
3 flashes: ignition switched on
with unauthorized key
Flashes 4x: alarm system is
disconnected from the motor-
cycle battery
5 flashes: motion sensor 3
Deactivation without
remote control
OE
with anti-theft alarm
Safety cutout switch in operat-
ing position (run).
Switch on ignition.
Turn signals are illuminated
once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Deactivation with remote
control
with anti-theft alarm OE
OE
with central locking
Press button 2 on the remote
control once.
See also the other func-
tions of the remote control
for the central locking system.
If the alarm function is de-
activated by means of the
remote control and the ignition
then not switched on, the alarm
function is automatically reacti-
vated after 30 seconds if "Acti-
vation after ignition off" has been
programmed.
Turn signals are illuminated
once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Customize anti-theft
alarm system settings
OE
with anti-theft alarm
Settings
Call up the
Vehicle
menu and select
Alarm syst.
.
4
85
z
-