BMW K 1600 GT Rider's Manual page 134

8
132
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
z
that they cannot be slipped back
over the brake rotor on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove screws 3 of brake
calipers on left and right.
Push brake pads 4 apart
slightly by rocking brake
caliper 5 back and forth against
brake disk 6.
Carefully pull brake calipers
back and out until clear of
brake disks.
Remove screw 1 and take
wheel speed sensor out of
bore.
Raise front of motorcy-
cle, preferably using a
BMW Motorrad front wheel
stand, continuing until the
wheel rotates freely.
Mounting front wheel stand
( 136).