BMW K 1600 GT Rider's Manual page 68

4
66
Symbol 1 appears on the display,
indicating that the seat heating is
ON.
z
If this warning symbol ap-
pears it tells you that the
onboard system voltage is low. If
applicable, the seat heating might
have been temporarily switched
off.
Passenger seat heater
Start engine.
Seat heating can be acti-
vated only when the engine
is running.
Select desired heating level
with switch 1.
The passenger seat can be
heated at two levels. The second
level is used for fast heat-up of
the seat; then the switch should
be switched back to the first
level.
2 Switch in middle position:
heating off.
3 Switch in one-dot position:
50 % heating output.
4 Switch in two-dot position:
100 % heating output.
Symbol 1 appears on the display,
indicating that the rear seat heat-
ing is ON.
If this warning symbol ap-
pears it tells you that the
onboard system voltage is low. If
applicable, the seat heating might