Manufacturer's Recycling And Energy Information - NEC MultiSync P403 User Manual

Manufacturer's Recycling and Energy Information

NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top
priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly
products, and always strive to help defi ne and comply with the latest independent standards from agencies such as ISO
(International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefi t by means of re-use, upgrading, reconditioning or reclamation of
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specifi c information on recycling facilities can be
found on our following websites:
http://www.nec-display-solutions.com/greencompany/ (in Europe),
http://www.nec-display.com (in Japan) or
http://www.necdisplay.com (in USA).
Energy Saving
This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor,
the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
Energy Saving Mode*
Energy Saving Mode*
*1: without any option, with factory settings.
*2: depends on destination.
For additional information visit:
http://www.necdisplay.com/ (in USA)
http://www.nec-display-solutions.com/ (in Europe)
http://www.nec-display.com/global/index.html (Global)
For Energy Saving information: [Default setting: AUTO STANDBY]
For ErP requirement:
Setting: DISPLAY PROTECTION
EXTERNAL CONTROL
ADVANCED OPTION 1
Power consumption: 0.5 W or less.
Time for power management function: Approx. 10-1200 sec.
For ErP (Network standby) requirement:
Setting: DISPLAY PROTECTION
EXTERNAL CONTROL
ADVANCED OPTION 1
Power consumption: 2.5 W or less (with 1 port activating)/3 W or less (with all ports activating)
Time for power management function: Approx. 5-600 sec. (Depend on setting)
Mode
1, 2
Normal Operation* *
1 (AUTO POWER SAVE)
1
(AUTO STANDBY)
Power Off
POWER SAVE
LAN POWER
INPUT DETECT
POWER SAVE
LAN POWER
INPUT DETECT
English-52
Power consumption
Approx. 105 W (P403)
Approx. 115 W (P463)
Approx. 150 W (P553)
Less than 2.5 W
Less than 0.5 W
Less than 0.5 W
AUTO STANDBY
OFF
NONE
AUTO STANDBY
OFF
NONE
LED color
Green
Amber
Red
Red