Connections; Wiring Diagram - NEC MultiSync P403 User Manual

Connections

NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a
loss of the monitor image.
NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
Before making connections:
* First turn off the power of all the attached equipment and make connections.
* Refer to the user manual included with each separate piece of equipment.

Wiring Diagram

*: Multiple monitors that are daisy-chained have a limit to the connectable monitors.
Connected Connecting
equipment terminal
DisplayPort
DVI (DVI-D)
HDMI
AV
VGA (D-Sub)
VGA (D-Sub)
Option
DisplayPort
DVI (DVI-D)
PC HDMI
VGA (D-Sub)
Option
*1: depend on signal type.
DVD Player
Stereo Amplifi er
Computer (Analog)
Setting in terminal mode
RAW/EXPAND* 1
DVI-HD
RAW/EXPAND* 1
D-SUB MODE RGB
D-SUB MODE COMPONENT
1
RAW/EXPAND*
RAW/EXPAND* 1
DVI-PC
1
RAW/EXPAND*
-
RAW/EXPAND* 1
English-14
Second monitor*
Solid lines = video signal
Dotted lines = audio signal
Computer (Digital)
Connecting
Input signal name
audio terminal
DP DPORT
DVI AUDIO IN1/IN2
HDMI HDMI
VGA AUDIO IN1/IN2
COMPONENT AUDIO IN1/IN2
OPTION OPTION
DP DPORT
DVI AUDIO IN1/IN2
HDMI HDMI
VGA AUDIO IN1/IN2
OPTION OPTION
Input button
in remote control
DisplayPort
DVI
HDMI
RGB/HV
Y/Pb/Pr
OPTION
DisplayPort
DVI
HDMI
RGB/HV
OPTION