Writing Of The Log File (Save Information) - NEC NC1201L-A User Manual

6-4. Writing of the log file (Save Information)

Log files saved on the main unit can be written to USB memory connected to the USB port of the main unit. To perform the
writing of the log file, use the following procedure.
1
Connect the USB memory to the USB port of the main unit.
Wait until the USB memory is recognized, and it enters the condition in which it can be used (5 or more seconds).
For details, refer to the instruction guide of the USB memory.
2
Simultaneously press the UP button and ENTER button.
The "Save Info." screen is displayed.
TIP
If you press the EXIT button during operation, operation is stopped and the display returns to the normal screen.
3
Press the LEFT/RIGHT button, and select the log file writing period.
The items that can be selected are as follows.
Today
7days
30days
Manual
4
Press the ENTER button.
When "Today", "7days", or "30days" is selected, the log file writing period is displayed.
Writes today's log files.
Writes 7 days' log files from today.
Writes 30 days' log files from today.
Writes the specified period's log files.
← The log file writing period is displayed.
6. Appendix
63