Save These Instructions; Tools And Materials Required - Haier HLP021-WM User Manual

English
20. This appliance must be connected to a proper electrical outlet with the
21. Proper grounding must be ensured to reduce the risk of shock and fire. DO
22. Hydrogen gas may be produced if the water heater has not been used in
23. Do not repair or replace any part of the appliance or attempt any servicing
24. To reduce the risk of electric shock or fire, do not use extension cords or

Tools and Materials Required

You will need to use the following tools when installing your washer:
1. Phillips Screwdriver - For bottom plate.
2. Open End Plyers - To secure fintake hose.
3. Tape Measure - Check measurement of washer location.
4. Level - To balance washer.
5. Wrench - To attach and lock caster.
3
Downloaded from www.Manualslib.com
correct electrical supply.
NOT CUT OR REMOVE THE GROUNDING PLUG. If you do not have a
three-prong electric receptacle outlet in the wall, have a certified electrician
install the proper receptacle. The wall receptacle MUST be properly
grounded.
more than 2 weeks. This may be explosive under certain circumstances.
If this is the case turn on all the hot faucets and let the hot water run for a
few minutes before using this appliance. This will let the trapped hydrogen
escape. Avoid accidents during this process by refraining from turning
ON any electrical appliances, smoking, lighting a match/lighter, and using
flames.
unless specifically recommended in the user-repair instructions, which you
understand and have the skill to carry out.
If for any reason this product requires service, we strongly
Note:
recommend that a certified technician perform the service.
adapters to connect the unit to an electrical power source.

SAVE THESE INSTRUCTIONS

HOUEHOLD USE ONLY
1 2
manuals search engine
3 4 5