Lexus RC350 User Manual page 265

Setting up intuitive parking assist
You can change the warning beep volume and Lexus Display Audio screen
operating conditions.
Press the "MENU" button on the Lexus Display Audio controller. (P. 328)
1
Select "Setup" on the "Menu" screen.
2
Select "Vehicle" on the "Setup" screen.
3
Select "LEXUS Park Assist" on the "Vehicle Settings" screen.
4
Select the desired button.
5
RC350/RC300/RC200t

The alert volume can be adjusted.
1
On or off can be selected for intuitive parking assist display.
2
Front center sensor display and tone indication can be set.
3
Rear center sensor display and tone indication can be set.
4
The intuitive parking assist can be operated when
■
Front center sensors (
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in a position other than P or R.
• The vehicle speed is less than about 6 mph (10 km/h).
Front corner sensors:
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in a position other than P.
• The vehicle speed is less than about 6 mph (10 km/h).
(At any speed when the shift lever is in R)
Rear corner and rear center sensors:
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in R.
Intuitive parking assist display
■
When an obstacle is detected while the Lexus parking assist monitor system is in use, the
warning indicator will appear in the top right of the screen even if the display setting has
been set to off.
RC350_RC300_RC200t_RC F_U (OM24671U)
4-5. Using the driving support systems
RC F

RC350/RC300/RC200t
):
265
4