Fujitsu MHG2102AT Maintenance Manual page 5

This manual describes the MHG2102AT, MHH2064AT and MHH2032AT 2.5-inch hard disk drives with
a built-in controller that is compatible with the ATA interface.
This manual explains, in detail, how to maintain the disk drives.
This manual assumes that users have a basic knowledge of hard disk drives and their application in
computer systems.
This manual consists of the following two chapters:
Overview of Manual
CHAPTER 1
This chapter explains MHG2102AT, MHH2064AT and MHH2032AT
maintenance requirements, operation verification, and troubleshooting.
CHAPTER 2
This capter explains the procedure for removing and replacing the
MHG2102AT, MHH2064AT and MHH2032AT
In this manual, disk drives may be referred to as drives, or devices.
IBM PC-AT is a registered trademark of IBM (International Business Machines
Corporation) of the United States of America.
Conventions for Alert Messages
This manual uses the following conventions to show the alert messages. An
alert message consists of an alert signal and alert statements. The alert signal
consists of an alert symbol and a signal word or just a signal word.
The following are the alert signals and their meanings:
C141-F034-01EN
Preface
Maintenance and Diagnosis
Removal and Replacement Procedure
This indicates a hazarous situation could result in
minor or moderate personal injury if the user does
not perform the procedure correctly. This alert
signal also indicates that damages to the product or
other property, may occur if the user does not
perform the procedure correctly.
This indicates information that could help the user
use the product more efficiently.
i