Rt-913 Status Led Indicators - AFi RT-913 Instruction Manual

Video transmitter with bi-directional multi-protocol data
Table of Contents

Advertisement

RT-913 STATUS INDICATORS
The RT-913 transmitter provides the following LED status indicators to aid in installation and
troubleshooting:
DATA TX/RX INDICATORS
DATA TX and DATA RX indicators are provided to monitor each of the three available data channels.
DATA 1 TX and DATA 1 RX correspond with DATA CH 1 input/output. Indicators for Channel 2 and
Channel 3 are also provided. An explanation follows for these DATA TX and DATA RX indicators.
DATA TX
A green LED indicator is provided to monitor the data coming in from the electrical interface, through
the RT-913, and out onto the fiber. The intensity of this indicator will vary with input data patterns,
however in typical applications it will cycle on and off as data is transmitted. Data transmitted status
associated with this LED is summarized below.
DATA TX LED
Green
Off
DATA RX
A green LED indicator is provided to monitor the data coming in from the fiber, through the RT-913, and
out onto the electrical interface. The intensity of this indicator will vary with input data patterns, however
in typical applications it will cycle on and off as data is received. Data received status associated with
this LED is summarized below.
DATA RX LED
Green
Off
VLI
A bi-color LED indicator is provided for the video input to the RT-913. DC power and video status
associated with this LED is summarized below.
Video Presence LED
Green
Red
Off
OLI
A bi-color LED indicator monitors the optical input power of the data signal that is being received at the
RT-913 from the MR-913 or the RR-913. DC power and optical input status associated with this LED
are summarized below.
Optical Level Indicator
Green
Red
Off
Data Status
Data Flow Present
Data Flow Not Detected
Data Status
Data Flow Present
Data Flow Not Detected
DC Power Status
On
On
Off
DC Power Status
On
On
Off
Video Status
Proper Input Video Present
Input Video Not Detected
Check Power Supply
Optical Status
Proper Optical Input Power Present
Optical Input Not Detected
Check Power Supply
7

Advertisement

Table of Contents
loading

Table of Contents